Greenlee 7906sb Quick Draw 90

Greenlee 7906SB - Quick Draw 90, 8-Ton Hydraulic Knockout Kit with Slug Buster (0.5 to 2")

Quick Draw 90
8-ton manual hydraulic driver
Includes Slug Buster (0.5 to 2")
Right angle driver head
Head can rotate 180 degrees for maneuverability in tight areas

The Quick Draw's compact design delivers 8 tons of punching force for portability and fast, easy one-person operation. Punch 1/2" to 2" conduit size holes in up to 10-gauge mild steel and 12-gauge stainless steel; also cuts aluminum, brass, copper, fiberglass and plastics. Please see below for more information on cutting capacities.

Available in three orientations

The Quick Draw is available in three styles to offer maximum versatility. Each is also offered with and without a Slug Buster 0.5 to 2" kit.

Quick Draw 90 - head is positioned 90 degrees to the tool
Quick Draw - for straight on punching
Quick Draw Flex - flexible head for use in tight areas

Quick Draw 90

Quick Draw

Quick Draw Flex

Style	Model	Description
Quick Draw 90	7906SB	Also includes Slug Buster 0.5 - 2"
Quick Draw 90	7908SBSP	Also includes Slug Buster Speed Punch 0.5 – 2"
Quick Draw 90	7904SB	Driver, draw studs and case only
Quick Draw	7806SB	Also includes Slug Buster 0.5 - 2"
Quick Draw	7804SB	Driver, draw studs and case only
Quick Draw Flex	7706SB	Also includes Slug Buster 0.5 - 2"
Quick Draw Flex	7704SB	Driver, draw studs and case only

Cutting capacity

These tools are designed to be used with the following Greenlee items:

Standard punches, dies, and draw studs
Slug-Buster punches, dies, and draw studs
Slug-Splitter punches, dies, and draw studs
SPEED PUNCH Knockout System
Electronic connector panel punches
Special shape punches, dies, and draw studs ("D", Double "D", Key, Square, Rectangular, and Oiltight with notches)

Standard, Slug-Buster, Electronic Connector Panel Punches, and special shape punches can punch holes through mild steel, brass, copper, aluminum, fiberglass, and plastics, with limited stainless steel capability.

Slug-Splitter punches, dies, and draw studs are capable of punching through all of these materials and are optimized for stainless steel.

STAINLESS STEEL
Slug-Splitter and Large Diameter Punches
Pipe and Conduit Size	Maximum Driver Rating
1/2" to 1-1/4"	10 ga (0.134", 3mm)
1-1/2" to 2"	12 ga (0.104", 2.5mm)
2-1/2" to 4"	N/A

MILD STEEL
Standard and Slug-Buster Punches
Pipe and Conduit Size	Maximum Driver Rating
1/2" to 2"	10 ga (0.134", 3mm)
2-1/2" to 4"	N/A